Can You Turn a Side Post Battery to Top Post? (Solved)

Published on: December 6, 2022
Written by Nolan Miles / Fact-checked by Porimol Sorkar

Most batteries are sided posts, which means the terminals are on the side of the battery. The top post battery has terminals on the top of the battery. If you have a side post battery and need to convert it to a top post, or vice versa, there are a few things you need to do.

First, you’ll need to remove the old terminal posts. Next, you’ll need to clean up any corrosion that might be present on the battery itself. Finally, you’ll need to install new terminal posts in the appropriate location.

  • First, identify the side post battery that needs to be converted;
  • Second, using a wrench, loosen and remove the terminal bolts on the battery;
  • Next, disconnect the negative terminal cable first and then the positive terminal cable;
  • Once the cables are disconnected, remove any corrosion that may be present on the terminals using a wire brush;
  • Finally, re-connect the positive terminal cable first and then the negative terminal cable before tightening down the terminal bolts with a wrench.

Side Post to Top Post Adapter Oreillys

Oreilly’s offers a wide variety of automotive parts and accessories, including a side post to top post battery adapter. This handy adapter allows you to use a side post battery in a vehicle that has a top post battery. It is made of durable materials and is easy to install.

Side Post Battery Adapter

If you have ever wondered how to install a side post battery adapter, wonder no more! This blog post will give you all the information you need to know about installing a side post battery adapter. A side post battery adapter is a device that allows you to connect a standard car battery to a car with side post terminals.

Side post batteries are often used in high-performance cars and trucks. Many people who own these types of vehicles prefer to use side post batteries because they offer more power and durability than standard batteries. Installing a side post battery adapter is not difficult, but it does require some basic mechanical skills.

The first thing you need to do is disconnect the negative terminal of your car’s battery. Next, remove the bolts that hold the stock battery tray in place. Once the tray is removed, you will be able to see the two posts on the side of the engine bay where the new battery will be mounted.

Using the supplied hardware, bolt the new bracket into place on both posts. Make sure that the bracket is level and secure before proceeding. Now, it’s time to install the new battery itself.

Position the battery so that one of its terminals is facing up, then slide it into place on top of the bracket. Use bolts or clamps (depending on what type of hardware came with your kit) to secure it in place.

Side Post to Top Post Adapter Autozone

If you have a side-post battery, you may need a side-post-to-top-post adapter in order to use a standard automotive battery charger. You can find these adapters at most auto parts stores, like AutoZone. They typically cost around $15.

Top And Side Post Battery

When it comes to batteries, there are two main types: top post and side post. Top post batteries are the most common type of battery, and they’re typically found in cars. Side post batteries, on the other hand, are less common and are often used in marine applications.

So, what’s the difference between these two types of batteries? For starters, top post batteries have their terminals (where you connect the positive and negative cables) on the top of the battery, while side post batteries have their terminals on the side. This can make a big difference when it comes to installation, as side post batteries may be more difficult to install in some situations.

Another difference is that top-post batteries typically have more capacity than side-post batteries. This means that they can store more energy and provide more power for your car or boat. However, this also makes them heavier than side post batteries.

If you’re not sure which type of battery is right for your application, it’s always best to consult with a professional. They can help you choose the right battery for your needs and ensure that it’s installed correctly.

Battery Post Converter

A battery post converter is a device that is used to change the voltage of a car battery. It is also known as a voltage regulator. The converter changes the voltage of the battery so that it can be used to charge other devices, such as phones or laptops.

There are two types of converters: AC and DC. AC converters are more common and are used to convert the alternating current from the outlets in your home into direct current, which can then be used to charge your devices. DC converters are less common and are only found in some vehicles.

They work by converting the direct current from the car’s battery into an alternating current so that it can be used to charge devices.

Side Post to Top Post Adapter Napa

If you have a side post battery but want to use a top post battery, you can use a side post to top post adapter. This handy adapter will let you use either type of battery, so you don’t have to buy a new one. You can find these adapters at most auto parts stores.

Side Post Conversion Kit

If you have a car with side posts, you know how annoying it is to constantly have to open and close the door manually. With a side post conversion kit, you can easily and quickly convert your car’s side posts to power-operated ones. These kits come complete with everything you need for the installation including brackets, motors, wiring harness, and detailed instructions.

The entire process takes about two hours and does not require any major modifications to your car. Once installed, you will be able to open and close your doors with the push of a button. This is a great convenience if you frequently transport large items or children in and out of your vehicle.

It’s also helpful if you have limited mobility as it eliminates the need to reach up and down to operate the door latch.

Car Battery Post Converter

If you have a car, you’ve probably had to deal with a dead battery at some point. If you’re lucky, it’s just a matter of jump-starting the car and getting on your way. But if the battery is truly dead, you’ll need to replace it.

This can be expensive, so many people choose to convert their car’s battery post from negative to positive in order to save money. The process of converting a car battery post from negative to positive is actually pretty simple. All you need is a wrench and a few minutes of time.

First, disconnect the negative terminal from the battery. Next, remove the old battery post and install the new one in its place. Finally, reconnect the negative terminal and tighten everything down.

There are a few things to keep in mind when converting a car battery post from negative to positive. First, make sure that all of the wires are properly connected before tightening anything down. Second, be careful not to overtighten the terminals – this can damage both the terminal and the wire itself.

And finally, make sure that there is no corrosion on either the terminal or the wire before making any connections. If you follow these simple steps, converting your car battery post from negative to positive should be quick and easy – and it could save you a lot of money in replacement batteries!

car battery post converter (1)

How Do I Make My Post to the Top Post Side?

There’s no surefire answer to this question since the algorithm that determines what posts are shown on the top post side is constantly changing, but there are a few things you can do to increase your chances of appearing there.

First, make sure your post is high quality and relevant to the subreddit you’re posting in. The more popular the subreddit, the more competition there will be for the top spot, so you need to give users a reason to upvote your post.

Second, timing is important. If you want your post to have a chance of making it to the front page, post it when people are most active on Reddit. This differs from subreddit to subreddit, but generally speaking, posting late at night or early in the morning will give you less exposure than posting during peak hours.

Finally, don’t forget about self-promotion! If you have other social media platforms (such as Twitter or Instagram), share your Reddit post there and encourage people to come to check it out. The more eyes on your post, the better chance it has of becoming one of the top posts on Reddit.

How Do You Remove a Side Post Battery?

Assuming you are referring to a car battery, the process is as follows:

1. Open the hood and locate the battery. In most cases, the battery will be on the passenger side of the engine bay.

2. Disconnect the negative terminal first, followed by the positive terminal. Make sure not to let the terminals touch each other as this can cause sparks and potentially damage your electrical system.

3. Once both terminals are disconnected, you can remove the hold-down clamp that secures the battery in place.

4. Lift the battery out of its compartment and take it to a disposal center or recycle it according to your local regulations.

You have to know that when a Puff Bar runs out of battery, the first thing you should do is check the charging cable to make sure it is properly plugged in.

Can You Charge a Side Post Battery?

Yes, you can charge a side post battery. There are a few different ways to do this, but the most common is to use a jumper cable. First, you’ll need to find a working vehicle with a side post battery.

Then, you’ll need to connect the positive (red) jumper cable to the positive terminal on the working battery. Next, you’ll need to connect the negative (black) jumper cable to the negative terminal on the working battery. Finally, you’ll need to connect the other end of the negative (black) jumper cable to the ground on your vehicle.

This will complete the circuit and allow for charging.

Can I Put Aluminum Foil on My Battery Post?

If you’re looking to give your car battery a little extra juice, you may have heard that wrapping the posts in aluminum foil can do the trick. But is this true? Can aluminum foil really help a weak car battery?

The short answer is no, putting aluminum foil on your battery posts will not help a weak car battery. In fact, it could actually hinder the performance of your battery and lead to corrosion. Aluminum foil is an excellent conductor of electricity, which is why it’s often used in electrical applications.

However, when it comes to batteries, conductivity is not what we’re looking for. Batteries rely on a chemical reaction between the metals in the electrodes and the electrolyte solution to produce energy. This reaction is hindered by electric current, which is why adding aluminum foil to the equation can actually decrease battery performance.

In addition, aluminum foil can cause corrosion on battery terminals. When exposed to moisture and oxygen, aluminum produces an oxide film that can eat away at metal surfaces. This process accelerates in the presence of salt (like that found in road salt), making winter a particularly bad time for using aluminum foil on car batteries.

So if you’re having trouble with your car starting in cold weather, don’t reach for the aluminum foil! A better solution is to invest in a quality set of jumper cables and keep them handy in case of emergencies.


If your car battery is starting to show signs of wear, you may be wondering if you can turn a side post battery to a top post. The answer is yes, you can! However, there are a few things you need to keep in mind before making the switch.

For starters, make sure that your new top post battery is the same size and voltage as your old side post battery. You’ll also want to make sure that the terminals on the new battery are compatible with those on your car. If everything checks out, then simply follow these steps:

1. Remove the negative terminal from your old battery using a wrench.

2. Unscrew the positive terminal and carefully remove it from the battery.

3. Take out the old battery and set it aside.

4. Place the new top post battery in its place and screw in the positive terminal tightly.

Rate this post